Sunday 1 February 2015

Extending Square Dies to Cut Rectangles

Extending Square Dies to Cut Rectangles Step-by-Step Tutorial
This is a useful tutorial on how to get more out of your Square Dies by extending them to cut rectangles.

With this method, you can extend the length or the width, but not both!

At the end of the project, you will find a downloadable PDF of these instructions.

You will need some:
Square dies (eg Tonic Layering Squares)
Die cutting machine (eg Grand Calibur)
Cardstock









Step 1
Measure the outer edge of your square die.  In my example (excuse the slight blurriness of the first photo), my outer edge measures 9.8cm and I know that this cuts a 9.3x9.3cm square.  I know need to cut a piece of card that's length is exactly 9.8cm+the extra length I want to acheive. So if I want a rectangle that is 2cm longer ie 11.3cmx9.3cm, I need to cut a piece of card that is exactly 9.8cm+2cm = 11.8cm.  The width doesn't matter as long as it is a bit wider than the die.
Step 1 Extending Square Dies to Cut Rectangles Step-by-Step
Step 2
Butt the edge of the die to the bottom edge of your piece of card and tape into place.  Place this on the cutting plate so that the other end of the die comes off the end of mat (below left). Cut and then emboss this piece (below middle).  You will now have a piece of card cut along thrtee sides (below right).
Step 2 Extending Square Dies to Cut Rectangles Tutorial
Step 3
Remove the card from the die, and re-allign the die flush to the opposite end of the cardstock. Manoeuvre  the die so that the cut edges slot into place (this can be a little fiddly but you will feel it when it gets seated correctly, and I find it helps if you trim off the outer flaps).  Tape into place, making sure the it is now the end that has already been die cut that is off the edge of the cutting mat.  Cut and emboss again.
Step 3 Extending Square Dies to Cut Rectangles stages


You should now have a perfectly die cut and embossed rectangle.

You can download a pdf of these instructions here.

Please do let me know if you have found this helpful, I love to read your feedback.


Pin It Now!

9 comments:

  1. Great tutorial dips. Maddy x

    ReplyDelete
  2. What a fab tutorial, thank you. Chris xx

    ReplyDelete
  3. great tutorial and easy to understand and follow
    carol x

    ReplyDelete
  4. Hiya Dips, such a fantastic tutorial. The photos and descriptions are amazing.

    ReplyDelete
  5. Hi Dips, Great tutorial...brilliant photos...Joolsx

    ReplyDelete
  6. Great tutorial! Happy Easter! Elaine-xxx-

    ReplyDelete
  7. A really great and useful tutorial.
    Heike xx

    ReplyDelete
  8. Fabulous tutorial, thank you so much for posting x

    ReplyDelete

I love to read your feedback, thank you for taking the time to comment.

Related Posts Plugin for WordPress, Blogger...